Erdal Fırat MühendislikErdal Fırat MühendislikErdal Fırat Mühendislik
(Pazartesi- Cumartesi)
Konak, İZMİR

33 Desk from closets ideas closet office, closet desk, home

This particular setup leaves plenty of room for storage, and a single shelf at hip height makes for the perfect computer desk and work space. Remember to install an electrical outlet in your closet if you’ll be using it as a home office. Plan to hire an electrician to add one before moving your desk inside. If this isn’t convert closet to office possible, consider running an extension cord into the closet from a nearby outlet, Patterson suggests. “It will often fit under the door and can be held in place with Command hooks,” she says. To add light without rewiring, attach battery-operated puck lights on the ceiling or the undersides of shelves above the desk.

desk built into closet

Cloffice storage ideas are incomplete without considering the sides of the closet. Add some shelves or cabinets to those areas to create further room inside a small workspace. So we started out this project with a sheet of plywood that we cut to the width and just shy of the depth of the closet. We also used our drill, wood glue, wood filler, and some wood screws. First, we glued the wooden front/facing piece on and then used small screws to secure it further.

Closet with Desk Built-in by @wonderwoodmom

To be certain that furniture will fit properly in the desired space, you must add a 3 inch allowance on each side, including height, width and depth. Cut the piano hinge to length and attach one of its leaves to the desktop. Using a combination square, mark the placement for the folding leg brackets on the back of the leg and underside of the folding desk. Predrill holes and install the brackets with the supplied screws. Mine measured 1-1/8-in.; that’s typical, but it can vary. I have wood-topped sawhorses, so I fastened down the 2×6 with 2-in.

A few small holes are easier to repair than long swaths of paint and drywall. Then I used the torpedo level to install the side wall cleats. If you don’t find studs to which you can fasten the side cleats, use hollow-wall anchors. With all this in mind, I marked the height for the desk and shelves inside the closet. With a torpedo level taped to a straight piece of 1×2, I made level lines on the back closet wall for the cleats.

Melamine – Wild Cherry

With a sharp chisel and a pull saw, you can quickly cut and push that out of the way. If you’re repurposing older doors, you may encounter a thin wood filler that takes more time to clear. You can use plywood for desktops as long as you use the smoother edge, sand it, and either stain it or apply a faux stain as I mention above. I like to use wood filler to fill any holes or deep scratches and then the faux stain completely covers any areas I’ve repaired.

Embellishment – Doors Update reach-in closet sliding doors with popular new styles. To get a wire up a wall and into a ceiling cavity, you’ll need to drill through some framing members. Square holes, one in the ceiling and the other in the wall directly behind the light fixture box. Then drill a hole through the top plate of the wall framing. I wanted enough height between the desk and the first shelf for my computer monitor, and enough room above the upper shelf to fit the boxes I previously had in the closet.

Recent Project Plans

1 x 2’s – These are for the supports under the desktop. You’ll need enough for the back wall support and two sides. Lighted glass bag display cabinets are fixed above white drawers finished with nickel and glass pulls. A pink boucle chair sits at a waterfall desk placed in front of a window framed by gray wallpaper. That can be aimed at specific zones in your workspace.

Nevertheless, for a genuinely well-lit closet office, you might have to call an electrician to add light fixtures and outlets to your brand new work zone. Recessed lamps can bring a remarkable degree of illumination to small work areas and look great with almost any decor type. When you rent your apartment or home, use battery-powered lights that could be mounted on the wall or shelf with double sided tape.

Leave A Comment